Plumbing Pipes | 3 Alerting Signs Your Bathroom Pipes Are Corroded Internally

25 April 2016
 Categories: , Blog


Plumbing pipes transport water into different taps in your bathroom and kitchen, but over time, they can get worn out and corroded, especially if the quality of water in your area isn't very good. While professional plumbers will need to repair or replace piping, some alerting signs will help you identify the possibility of pipe corrosion. Failure to take action may prove costly in the future as you deal with burst pipes and structural damage, so make sure you get professional plumbers to fix your corroded bathroom pipe problem as quickly as possible.

Reduction In Water Flow And Pressure

One of the most common signs of pipe corrosion is low or reduced water flow and pressure. Water pressure is the intensity at which water is pushed out of the tap or showerhead, while flow is the volume of water flowing through the pipes. If you notice lower water volume or lower pressure intensity than before, then you're probably dealing with corroded internal bathroom pipes. This could be because your piping has burst, expanded or cracked. Qualified plumbers will need to assess whether the corroded pipes can be repaired or replaced.

Bad Odours In Your Bathroom

One of the biggest problems with corrosion is the fact that it affects water flow and pressure. This could also mean that the pipes retain some dirt and debris over time, which may give rise to the growth of mould and mildew, especially if the corrosion has led to a leak internally. Mould and mildew are essentially fungi that grow because of excess moisture, humidity and darkness –– leaving behind a stale odour that can become unbearable if left ignored for too long. If you notice a bad odour in your bathroom, then it is probably because of pipe corrosion somewhere. Professional plumbers are best equipped to find and fix your corroded pipe problem.

Damp Wall Spots

If water starts spotting on your walls without any reason, then it could be because of pipe corrosion. When pipes get corroded, the metal starts to give way, which could form holes and cracks without your knowledge. These cracked pipes running through the walls will cause water to leak through them, which will eventually make their way to the visible part of your bathroom walls. Don't take damp spots likely because this is likely affecting the structural integrity of your home. Ignoring them could also lead to mould and mildew growth, which can become toxic.

Inform your plumbers immediately if you notice these alerting signs of pipe corrosion, so that they can take appropriate action to prevent it from becoming a major plumbing catastrophe.